Looking for a preset or routing advice

What I want to do is quite simple, but can't seem to achieve:
I want to be able to record myself making sound effects on my iPad (recording into Reaper) and to be able to hear what I am playing on the iPad. This is working fine.
I also want to be able to play it back on my PC DAW (Reaper or anything) and hear it, and then make adjustments to the audio in the DAW. I can't seem to be able to do this.
Could someone please suggest a routing that will allow me to be able to do BOTH without having to have two alternative routing configurations to do the job?

Comments

  • It's in the Auracle User Guide:

    Using more than one computing device with Auracle

    Most users should find Auracle to be remarkably simple and straightforward, because  it hides a great deal of its routing complexity under the hood. However if you are using 2 computers, or one computer and an iOS device, things get slightly more complex. In most cases (except for the PA12) Auracle will ask you which is your primary Digital Audio Workstation computer and assume that you will be doing most of your recording on that. Your secondary computer or iOS device can still be used and audio and MIDI signals will be automatically routed between your two computing devices.


    You can route audio to from one computing device to another using the virtual output channels on your DAW / audio app:


    • Outputs 1&2 from the Primary DAW are always routed to the Analog Outputs of your interface

    • Outputs 3&4 from the Primary DAW are routed into the Secondary computer / iOS device

    • Outputs 1&2 from the Secondary computer / iOS device are routed back to Inputs 5&6 on your Primary DAW


    MIDI is always wired up automatically.


    Example: you have your DAW running on your main computer on USB1 and you want to send MIDI data to a virtual synth on your iPad connected to USB2, and then send audio back from the iPad synth to your computer.


    1. In your DAW, select a MIDI track

    2. Select your DAW’s list of possible MIDI outputs on that track

    3. You will see 16 virtual MIDI ports on USB2 - pick USB2 Port 1

    4. In your iPad, ensure that your synth app is listening for MIDI Input

    5. In your iPad audio will normally be automatically directed from your app to your iConnectivity interface. If it does give you a choice of audio outputs pick USB1 1&2

    6. In your DAW, create a new stereo audio track and set the track’s audio input to be Inputs 5&6

    7. Now when you press play, MIDI will be sent from your main computer to your iPad and audio will be sent back from the iPad to your DAW


  • Thanks for your reply.
    When I use Auracle, I can record into my DAW by clicking on the USB2 radio button in the master section ot Auracle, BUT I can't hear what I am playing. 
    If I want to hear what I am playing I need to click USB1, but then my DAW doesn't pick it up.

    That's the conundrum I'm faced with. The only way around this was to use the iConnectivity routing matrix, but that meant if I want to hear what I had recorded in the DAW I have to load a new routing preset. I'd really like to use the Auracle, but be able to hear what I'm playing while recording...
Sign In or Register to comment.