Avatar

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

dirk

About

Username
dirk
Joined
Visits
1
Last Active
Roles
Member

Comments

  • If a future iConnectivity MKII line would allow for regular USB to keep working I'll certainly upgrade.
    in MPE Comment by dirk November 15
  •  Rodney please, I'm living a freakin' nightmare because iConfig absolutely wants to open the Eventide ports to look for whatever, and H9Control doesn't let them go so iConfig reports that it can't open those ports and won't start. But these ports ar…
  • I figured out a workaround that magically works: when I send the clock from the master device (Elektron Digitone) first to the Novation SL25 Remote midi controller set to sync to external clock, and then have the clock echoed out over one of the SL2…
  • rodney_iConnectivity said: I have a Blofeld sitting right beside me as I type. I love that synth :-) Yep, it's surprisingly good and very deep, lots of possiblities. So much power in a small form factor (especially when you consider i…
  • My Waldorf Blofeld (desktop module) is working perfectly. That's weird because the same user (markpdunn) that reported the Novation 25 as "not working" didn't seem to get his Blofeld recognised. Both work here without a hiccup on a UGreen 7 port pow…
  • I tested the Seabord block but they're basically all the same. You need to plug it in a regular USB hub when you need to configure it via their "Dashboard" app, but the settings are saved in the device so it doesn't need to remain tethered. Once con…
    in MPE Comment by dirk November 11
  • I can confirm that Roli Seaboards work with iCM4+ in all modes.
    in MPE Comment by dirk November 11
  • What would be a similar procedure on Windows10? I have at least 10 "communication lost" events per day, and often need to reboot because iConfig won't restart (Windows reports that a previous instance resides in memory).
  • rodney_iConnectivity said: rodney_iConnectivity: Why not please 'amateurs' and 'professionals' by giving them an option in Auracle to show ONLY THE CONNECTED ports or ALL ports? We have considered that and it may come in a future version. …
  •  Route HST1 to USB3-HST1 (and vice-versa, standard routing). Run MidiOx on the PC and monitor HST1. I don't see why you would need to mirror (merge and re-route) data to another port and monitor that stream.
  • Thanks, I just wanted to be sure. It's indeed quite a hack, not very useful for common controllers and synths, but interesting for "think outside the box" concepts. I just bought a small Roli Seaboard block "keyboard" and the bundled synths were dev…
    in MPE Comment by dirk November 7
  • rodney_iConnectivity said: That's really useful guys. As we were starting to suspect, it certainly seems like an issue with ucrtbase.dll, which is a Microsoft Visual Basic library. It's not just us who have problems with this DLL, it has issues…
  • But you never answer my question: can I run the current Auracle "just to see what it does" now that I have my rig fully configured, WITHOUT LOSING MY WORK?
  • rodney_iConnectivity said: No, AURACLE declares what you need. For example, if you don't have something plugged into a virtual USB-MIDI port, then Auracle doesn't show you that port. iConfig does show you all those ports, even though they are …
  • https://www.midi.org/specifications-old/item/table-1-summary-of-midi-message In fact I was wrong in my 1st post, but I was misleaded by my Novation Remote that labels  the commands as being MMC. It's not. They are  plain universal midi "system r…
  • I do agree with the statement that I don't want anyone to decide what I need and don't need. That's absolutely up to me to decide, sorry your customers are mostly very creative people, and quite technically advanced, that's the very reason they inve…
  • TC introduced this as a feature in the last firmware update and they stick to it. It would be useful if we could filter these messages out from the System Real-Time Messages stream (basically, isolate the clock) . BTW It's not Sys-Ex, it's conventio…
  • Did you try to run it with elevated privileges?
  • keithw99 said: So my question: how should mio10 "power users" migrate from iConfig to Auracle without breaking anything? Ideally it would be best to continue supporting iConfig until Auracle is mature enough to ensure a safe, lossless migratio…
  • Had the same issue, I confirm that we need the rtpMidi from the iConnection site, not the one that I too initially downloaded from the  developer's site
  • Doesn't work unfortunately. I need to filter out all real-time events and I lose the clock (which is crucial for a looper for start-stop quantizing purpose) .
  • Oh great, thanks, I ignored that!
  • I actually said "advanced routing and filtering". Is there a risk of losing all the work I did in iConfig by trying out Auracle once more? For instance,  I need to filter everything but real time events on the input of one particular port, and block…
  • There are various adapaters available :USB to USB-C, Lightning to USB-C, the price range for 4€ (generic) to 50€ (apple)
    in Ipad Pro 2018 Comment by dirk October 31
  • Yes I understood, my iPad2 is limited to iOS 9, I wanted to upgrade because I want to run some the Moog Model D which doesn't run on iOS9
  • I still have an old iPad2, but was considering upgrading. There's no way I set an iPad to be a master clock in my set-up, so I'll reconsider. Thanks for the information.
  • Well, as I understood "sync factor" only reports the amount of latency compensation  the host should apply. So that's of not much help. There are a few clock settings in the iConnect application: we can sync audio to internal clock or one of the 3 U…
  • One more precision: the symptoms are: a huge amount of distortion, that remains for quite some time, but if I leave averything idling for a while, that distortion gradually fades away leaving some crackles. To get rid of this for 20 minutes or so, w…
  • Hi, I'm having the same issue (ICM4+) with the iOS app on iOS 9. What happens is that it will only detect the ICM4+ if there's a network session initiated in NetConfig. Which basically means I need to bring a wireless router to my gigs if I want to …
  • Oh, that made me try something: it took me 5 minutes to start playing a DX7 emulation using an app on my Android Phone, using that 5€ USB-OTG cable, plugged into a device jack on the IC4+, and had pristine sound with no noticable latency coming out …