> Also USB Device 2 is the power USB connector if I am correct ... it's only for power and firmware update.
Wrong! USB Device 2 is a fully fledged USB Port. In addition, this is the Port which provide USB Bus Power to the unit and this is the Po…
> I have a MIDI Solutions Quadra Thru that should help to make connections.
Notice: the Quadra is not compatible with iConnectivity interface products (and many other equipment) at all:
> found the Metwork MIDI section but it is only for a PC device. Any one help...?
Step by step instruction for OSX including screenshot is there:
iCM4+ user manual page 36: Network MIDI set-up
mio10 user manual page 6: Netw…
> Another issue is the charge to the iPhone seems to be dropping out. I am powering the Audio2+ via USB from a Mac Mini. Is this a fault?
Works as design.
Being able to charge your iPhone you need the optional power supply.
You can not connect two iPad to iCA2+, it support one iOS device plus a Mac/PC connected to the other USB port.
iCA4+ support two PC/Mac/iOS device in any combination. Stay with iCA4+ if you wish use two iOS device in parallel.
> Do I need the lighting cable?
Use the Lightning cable bundled with your iPad.
iConnectivity's optional Inline Lightning Cable is not compatible with iCA2+.
> Do I need the 9v adapter?
Only in case you like to charge your i…
> I just purchased iconnectvity Lightning to usb type b iOS inline connection cable.
> Can this work with the iconnect audio + 2 or will I send it back?
No, this cable will not work with iCA2+.
The iConnectivity 30 pin and Ligh…
> I want to connect my Roland Vdrum with a USB type b midi output to trigger my Roland FA-08 sound via its 5pin din midi input
What exact V-Drum model are you referring to?
I am afraid direct connection will not work due the USB on…
> I wonder if it is possible somehow to connect USB2 of my ICA2 to the USB port of my Roland FA-06.
Direct connection in between iCA2+ USB2 and FA-06 is not possible.
USB is a Device <> Host protocol.
iCA2+ and FA-06 featurin…
ForestCat + Diggo,
Concerning the custom multi-client drivers, you are 100% right! Even my soon to be 20 year old Emagic AMT8 MIDI interface had multi-client MIDI drivers back in those times (Win98/XP, 32 bit).
From audio point of view custom Win…
> Does anyone know if the iConnectMidi2+ works with the big iPad Pro?
Sure, it works.
iConnectMIDI2+ is an Apple Certified Product featuring native iOS support.
Use the included iConnectivity Lightning cable. You will be abl…
> Any ideas or solutions.
"The Quadra Thru is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products"
iConnectMIDI1 could not power the Midi Solutio…
> To sum it up... I'm just wondering where does the Mio 10 sit in my setup
> 1- Does it sit before my sound card or after ? I assume before...
Actually the mio10 would sit along your audio interface.
mio10 will manage the MI…
> What is the difference between IconnectMIDI4+ and the new MIO4 appart from the look ?
iConnectMIDI4+ USB Device ports cope with USB Audio. mio4 is a MIDI only interface, no USB Audio support, hence no Audio passThru feature.
i've tried to understand your setup and i am still wondering what you like to achieve.
> Is it possible to connect an iPad to the mio2
It is possible to connect the mio2 to iOS device either via Apple 30 pin Camera Connection Ki…
> Couldn't find this information on your new mio Midi interfaces, are they, as your first generation Midi interfaces, Audio passThru ?
mio2 is a MIDI only interface device without the Audio passThru feature.
You may find the compa…