Remap MIDI events?

yoMuzicMan

Hi everyone!
Can the mioXM take a MIDI event from device#1, change it to another MIDI event, and send to device#2?

Here is an example:
Device#1 sends MIDI CC 80 with value 127 on MIDI channel 6
mioXM converts it to a System Real-Time "Start" event and sends it to Device#2

Thanks,
Ron

tsho08

No that would not be possible inside a mioXM. You can remap or filtering message but you cannot change the message type. You would need something like BOME on a computer to do that. Which you could use the mioXM to go in and out form that.

bobleeswagger

@yoMuzicMan in case you still have a free USB slot on your mioXM and a few bucks for an Arduino UNO (which can act as a class compliant USB-MIDI-device) you can easily implement any MIDI event transformation yourself:

https://github.com/othmar52/mioxm-workaround/commit/3866087e6ab388b7afeb13a04365d6f96a3989fc

(No soldering or additional parts required)

If you are interested i can create a small tutorial...

pmatilai

Just FWIW, I'd recommend a Teensy board over Arduino. It's faster, smaller, cheaper and nicer to program. I have a Teensy LC in a similar task, remapping arbitrary MIDI this to MIDI that, including SysEx and all.

DovJ

Check out BomeBox. It’s an awesome solution for doing almost anything with Midi. 

You develop and test the translator on a PC or Mac with Bome Midi Translator Pro software, then load the “program” onto the BomeBox, where it executes without the computer. 

I can’t recommend this highly enough as a partner to the powerful routing of the MioXM.