Comments

• Hello, we have 4x mio10 and 4x mioXL and it's the best solution we've found so far so we definitely recommend it. We also have the AMT8, which still works great, but it's via USB, so it's only a short distance away from the computer. We also had a …

  in using more than one iConnect MIDI interface Comment by studiogibon January 25
• 8x of mio and Auracle is a lot, but really very slow and in addition it gets stuck, pauses and then only a black screen of the program remains and it is necessary to drop Auracle and start it again. I understand that often nothing much changes in t…

  in Auracle Comment by studiogibon January 23
• Yes, we know that it works like this, but we have 8x mio, which is a total of 80 converters (now we have already bought 55). It would be cheaper to buy more and more mioXL and use only DIN inputs (but only 8 IN/OUT), which will happen anyway, unless…

  in USB->MIDI Adapters not reserving correctly Comment by studiogibon January 23
• It does something like this (see pictures). We use three (or only two) types of MIDI converters. The first converter (MIDILINK Mini) could not be used at all - when switching off the mio, the Midilink Mini did not start and the IN connector had to b…

  in USB->MIDI Adapters not reserving correctly Comment by studiogibon November 2022
• So tried in Monterey and it does there too, you don't even have to restart it, but you just have to close the application, but you can't open it anymore and the application freezes. Again, there are no more than 49 ports. So what now? to sell all mi…

  in mio10 + mioXL Comment by studiogibon April 2022
• I understand, but we have the latest version of BigSur 11.6.5. Does that mean it won't work under BigSur? j&r

  in mio10 + mioXL Comment by studiogibon April 2022
• Another attempt ... I tested it on iMac Late 2013 with Mojave and all 66 ports (3x mioXL after 22 RTP ports) loaded without a problem. So there may be a bug in BigSur or MacMini M1. j&r

  in mio10 + mioXL Comment by studiogibon April 2022
• So other attempts with 3x mioXL ... on each mioXL I entered ports 1-15 and everything was fine, but when I entered another 3 ports (16 + 17 + 18), everything froze again and neither AUDIO / MIDI nor Auracle. Is it possible that mioXL can no longer c…

  in mio10 + mioXL Comment by studiogibon April 2022
• So more information ... if I enter one mioXL (RTP session) in AUDIO / MIDI, then everything is fine, if I enter the second mioXL, everything is also fine, but when I enter the third mioXL, AUDIO / MIDI always freezes. And it doesn't matter in which …

  in mio10 + mioXL Comment by studiogibon April 2022
• I also forgot to write that after the jam, neither Auracle nor iConfig can be launched and the mio10 will flash once every few seconds. j&r

  in mio10 + mioXL Comment by studiogibon April 2022
• Hi, so I found that when the mio10 is connected via USB and also via ETH (in order to use an RTP connection), sometimes it happens that the mio10 connects spontaneously via RTP (this can be seen in Auracle) and in AUDIO / MIDI in The MAC disappears …

  in View mio connections in Auracle Comment by studiogibon April 2022
• I understand and understand... but USB will never be as good as DIN and it doesn't always work reliably, and longer distances can't be achieved. It's just a nuisance, while DIN is solid and will definitely be present in the tools for a long time to …

  in mio with DIN connectors? Comment by studiogibon March 2022
• Thanks for the info, yes, it makes sense and the connection really changes in different ways. Thank you.

  in View mio connections in Auracle Comment by studiogibon February 2022
• Great, thanks ... it uses ESI, for example. https://www.thomann.de/cz/esi_m8u_ex.htm r.

  in mioXL firmware modification Comment by studiogibon August 2021